Rover comes installed with a mounting plate for mounting VIVE Tracker (3.0) to Rover.

  1. Align the mounting screw on Rover with the screw hole on the bottom of VIVE Tracker (3.0).

  2. Attach VIVE Tracker (3.0) to Rover and rotate the mounting screw counterclockwise until it is securely fastened.

    Image_Mounting VIVE Tracker (3.0) to Rover_01.png

    <aside> <img src="/icons/light-bulb_orange.svg" alt="/icons/light-bulb_orange.svg" width="40px" /> TIP: Make sure the front edge of the tracker is parallel to the front side of Rover, which is indicated by the blue arrow on the chassis. Failure to properly align the tracker may reduce the accuracy of camera calibration.

    </aside>

    Image_Mounting VIVE Tracker (3.0) to Rover_02.png

  3. Connect the Type-C end of a 10-cm USB Type-C® to Type-A cable to the USB Type-C port on VIVE Tracker (3.0), and then connect the Type-A end to a USB Type-A port on Rover.

    Image_Mounting VIVE Tracker (3.0) to Rover_03.png

https://embed.notionlytics.com/wt/ZXlKM2IzSnJjM0JoWTJWVWNtRmphMlZ5U1dRaU9pSnZjRlk0UVVOa2JFSndhemhYWmxvek1tYzVaU0lzSW5CaFoyVkpaQ0k2SWpOak5UazBNbU0xWWpVMU5EUXpZMlE1WWpjNVl6RXlOakJsWVdWaVpEQmpJbjA9